Wall Mounted Basin Mixer Set with 160mm Spout

A basin run with the pipework in the wall, and nothing standing on the counter. This set brings together the mixer and its short spout so a vanity or a solid surface top can be wiped clean in one movement, which is what makes it the usual choice for a hotel bathroom, a clinic washroom or anywhere the surface has to survive daily use. The spout is 160mm long and 18mm across at the outlet, proportioned for a standard basin. Both parts are cast in AISI 316L stainless steel, the grade whose molybdenum content resists the chloride carried in tap water and in salt-laden coastal air.

Key features

1. Mixer and spout supplied as a matched set, so the finish cannot drift between them
2. 160mm spout length, sized for a standard basin and a low splash back
3. Nothing mounted on the worktop, leaving the surface free to be wiped through
4. Available in brushed stainless steel, deep grey, Tinta and gold PVD

Specification and installation

Both components are fixed to the finished wall, with the hot and cold supplies and the waste run concealed behind it, so the rough-in and the tiling are completed first. The spout and the control are then set at the height the basin and the installer require, and the two are aligned on the wall face.