3-hole basin mixer with low spout

Fitting a basin with its own separate waste, rather than the pop-up plug a mixer normally includes, is what this Volga 3-hole mixer is built for: it comes without a drain assembly, so specify the waste kit separately. The low spout suits a shallow vessel basin better than the taller 160mm spout elsewhere in the range, and the AISI 316L body carries the same anti-limescale aerator and 1/4-turn ceramic valves as the rest of the Volga tap collection.

Key features

• Supplied without a drain, so order a matching waste kit separately.
• Low spout suits a shallow vessel basin rather than a deep bowl.
• 1/4-turn ceramic valves need no re-washering over the mixer's working life.
• M18 5x1 anti-limescale aerator resists limescale build-up in hard-water areas.
• 100mm hole centres fit the same standard 3-hole basin drilling.

Specification and installation

The three holes sit on the same 100mm centres as the taller-spout Volga mixer, so it drops into an identical basin drilling; the spout itself sits lower, at 79mm rather than the deeper reach of the recessed version. Both connections are G1/2”. Because there's no waste included, confirm the basin's own drain arrangement before ordering, and pair the tap with a Volga accessory set for a matched-finish washroom.