Recessed 3-hole washbasin mixer with 16 cm long spout

A recessed 3-hole basin mixer puts the lever handles either side of the basin and the spout in the centre, and this Volga version does it in AISI 316L stainless steel with a 160mm spout reach, long enough to clear a deep countertop basin without the water landing short of the bowl. The 1/4-turn ceramic disc valves and M18 5x1 anti-limescale aerator are standard across the Volga tap range, and the 316L body means the mixer holds its finish in a hard-water area that would mark plated brass.

Key features

• 160mm spout reaches a deep countertop basin without a short pour.
• 1/4-turn ceramic disc valves outlast a traditional washer-and-seat tap.
• M18 5x1 anti-limescale aerator keeps the spray even in hard water.
• 100mm hole centres match a standard 3-hole basin drilling pattern.

Specification and installation

The three tap holes sit on 100mm centres either side of the mixer body, a standard drilling pattern for a 3-hole basin, and the recessed design means only the handles and spout show above the counter with the mixing body concealed beneath. Both supply connections are G1/2”. Specify alongside the Volga low-spout mixer or basin taps to keep a run of countertops in one finish.