Deck Mounted Bidet Mixer without Drain, 316L Steel

A bidet tap has one awkward requirement: the spout has to reach the bowl without standing in the user's way. This deck mounted mixer is built for that job, with a spout that sits low and directs its flow into the bowl, and it is supplied without a drain so the waste and the pop waste are specified separately. Bidets are often retrofitted into a room that already has the plumbing, so the mixer has to suit a worktop that is already built. This one fixes through the top. The body is AISI 316L stainless steel, chosen for a fitting that sits under running water daily.

Key features

• Spout shaped to direct water into a bidet bowl rather than past its rim
• Supplied without a drain, so the waste and the pop waste are chosen separately
• Fixed through the worktop, which suits a retrofit onto an existing top
• 316L stainless steel, the marine grade, for standing water and coastal air

Specification and installation

The mixer is fitted through the worktop, sealed to the surface and tightened from below, so the deck hole and the top thickness both matter. Give the tail room to clear the trap, and set the isolation valves and the waste before the top is bonded down.