1 ”1/4 drain with push button in stainless steel

Not every basin waste needs to be plated brass: this 1 1/4 inch push-button drain is turned from AISI 304 stainless steel, so the collar and plunger resist tarnishing long after plating would need replacing. It adjusts from 4mm to 65mm above the fixing point, covering a thin countertop basin or a deep vessel bowl with the same part. The vendor sheet specifies it against the Nilo collection, making it the natural pick wherever a Nilo basin needs a push-button waste rather than a pop-up.

Key features

• Adjusts from 4mm to 65mm above the fixing point for thin or deep basins
• G1 1/4 male thread fits the standard waste aperture with no adapter
• Solid AISI 304 collar and plunger rather than a plated finish
• Sold in Brushed, Copper PVD, Black PVD and Gold PVD

Specification and installation

Pass the body through the basin's waste hole and lock it from beneath with the G1 1/4 thread, setting collar height flush with the base before final tightening. Because adjustment spans 4mm to 65mm, this is one of the few wastes that still works if a basin is later swapped for a deeper bowl. The sheet specifies it against Nilo rather than the wider range, so treat it as Nilo-specific and match its finish to the basin's tap.