70 cm long sliding rail with 316L stainless steel sliding device

Adjusting a handshower's height for different users, or parking it out of the way between showers, is what a sliding rail is for, and this Volga rail does the job entirely in AISI 316L stainless steel rather than a plastic-runnered aluminium alternative. The 700mm rail and its sliding bracket are both 316L, so a coastal or high-humidity bathroom isn't relying on a painted or anodised finish to keep the slider moving. A 1500mm flexible hose comes with it, long enough to reach the rail's full travel.

Key features

• 700mm of travel suits both a seated user and someone showering standing up.
• Sliding bracket is 316L, not painted alloy, so it won't seize or flake.
• 1500mm hose reaches the rail's full length without pulling at the wall inlet.
• Four finishes match the Volga taps and shower valves in the same room.

Specification and installation

Fix the rail vertically to a solid wall over its 700mm length; the sliding bracket carries the handshower and needs no separate holder once it's in place. Feed the 1500mm hose from a wall inlet at the base of the rail, matched to the rail's own G1/2” connection sizing. Specify with a Volga concealed or exposed mixer to complete the valve side of the installation.