Deck Mounted Basin Spout

The tap is the part everyone looks at and the part most often left to a different supplier. Here the outlet is supplied on its own: an arm that rises from a counter or a vanity top and delivers over a washbasin, for installations where the control sits separately and only the delivery end needs replacing. Installers reach for it during a partial refit, in a guest washroom where the worktop is already templated, or wherever a full-height splashback leaves no room for a wall fitting. The body is AISI 316L stainless steel, the molybdenum-bearing grade that shrugs off chloride and salt.

Key features

• Single outlet, so any deck mixer can be paired with it
• AISI 316L stainless steel, built for damp and coastal rooms
• Rises straight from the counter with no wall boxing to chase
• Brushed, polished, deep grey, gold PVD and Tinta options
• Same outlet body across a whole floor of washbasins

Specification and installation

Drilled through the worktop or basin rim and set from above, with the pipework concealed beneath. Order the finish that matches the mixer and the basin furniture rather than the tap in isolation. Ask for the drilling template before cutting, and confirm the waste that will sit in the bowl below.