Long Reach Wall Mounted Bath Spout With Hot And Cold Controls

Reach matters more than people expect when a bath is set against a wall with a wide rim, a raised edge or a platform beneath it: a short spout stops the flow before it clears the ceramic. This wall mounted bath spout projects 190 mm and stands 180 mm high around a 21 mm spout, with hot and cold water controlled at the fitting. It is cast in AISI 316L stainless steel, the grade used where chlorides, coastal air and constant commercial traffic are all in play.

Key features

• 190 mm projection clears deep baths, wide rims and raised-edge installs
• Taller body at 180 mm suits installations set higher off the floor
• Hot and cold water handled at the spout, one fitting instead of a pair
• Five finishes: brushed stainless steel, polished, deep grey, gold PVD and Tinta

Specification and installation

The longer projection is the reason to choose this spout over a standard one, so check the clearance to the far edge of the bath before the wall is tiled. It fixes through the finished face and can be dressed into an existing tiled wall with care. Order the finish to match the rest of the brassware in the room.