380 x 380 mm Square Ceiling Rainfall Shower Head

The 380 x 380 mm square is the compromise plate: it carries the two spray functions of the larger overhead heads on a footprint that fits a mid sized shower rather than a dedicated wet room. Set overhead, it lays down a broad rain pattern across the top of the bather, and the waterfall function puts a heavier fall where it is wanted instead. Square plates are also the easiest to set out, because the clearance is the same on every wall. The body is AISI 316L, the molybdenum-bearing grade that resists chlorides, so it suits treated water and coastal buildings.

Key features

• Rain and waterfall spray functions on one square plate
• 380 x 380 mm, so clearance is equal on every wall
• Ceiling mounted and fed from the void above at half inch
• AISI 316L, the grade for chlorinated and coastal installations
• Brushed or polished stainless steel, to match the room fittings

Specification and installation

The head is fixed to the ceiling and connected from above at half inch, so set out the position before the ceiling is closed and check the plate clears the walls on all four sides. It pairs with a freestanding column where the ceiling above the tray is high enough. A square plate of the same size is offered without the second function.