Concealed Installation Water Connection Set with Flexible

Every concealed installation needs a connection somebody can reach before the wall is closed, and a flexible link that will not fight the pipework it joins. This set is machined in AISI 316L, the molybdenum-bearing stainless grade that resists chloride attack in a wet room. It is fitted during the first fix and then disappears behind the tile, so the grade matters for the life of the build rather than for a finish you can see. Order it with the concealed body it serves.

Key features

• Half inch flexible link gives the joint room to move
• Fitted at first fix and concealed behind the finished wall
• AISI 316L body, grade suited to damp and chlorinated environments
• Supports wall fed fittings where no deck or surface pipework is wanted
• Available in five finishes for continuity with exposed trim

Specification and installation

The set is installed during the first fix, usually behind a stud wall or a tiled duct, and the flexible connector is made up at half inch to the concealed fitting it feeds. Because it is buried, position it where it can still be reached through a tile or an access panel if the build changes. It pairs with the concealed bodies, wall outlets and slide bars in the same range.